Linux kernel newbies em português

Hi-G dryer http://www.kosun.us/drilling-waste-management/vertical-centrifuge.html is popular used for water based mud drilling cuttings treatment. After Hi-G dryer, high speed centrifuge will be followed for further treating. After treated by centrifuge, solids parts can be used for construction; liquid part can be further treatment by flocculent unit. Hi-G dryer is also can be used for oil based mud drilling cuttings treatment; vice versa, vertical cuttings dryer can also be used for water based mud drilling cuttings treatment.

With the continuous improvement of environmental requirements, drilling waste treatment scene put forward higher requirements, there cuttings treatment purification system, not only a very good solution on-site environmental problems, while on-site waste produced solid control system secondary recovery treatment, to retain a useful slurry while maximizing the cuttings for centralized reprocessing after curing, reducing on-site work for the destruction of the surrounding environment.KOSUN drilling mud waste treatment system incorporates screw conveyor, Hi-g dryer http://www.kosun.us/drilling-wa

Decanter centrifuge http://www.kosun.us/solids-control-equipment/decanter-centrifuge.html is widely used in drilling mud separation to separate smaller solid particles after the equipment processing such as drilling mud shale shaker and drilling fluids mud cleaner or desander and desilter. Usually, decanter centrifuge is equipped with screw pumps or slurry pumps to feed drilling mud to the centrifuge. Correct and proper operation and good condition make sure that drilling mud decanter centrifuge operate ordinarily with high performance.

Drilling waste management http://www.kosun.us/drilling-waste-management/and cuttings disposal have become a critical issue for any drilling operations because of stringent effluent limitations on the discharge of contaminated drill cuttings to the environment. The wastes discarded by the drilling mud circulation system must be disposed in safe way to the environment. KOSUN Solids Control can offers vertical cuttings dryer and Big Bowl Decanter Centrifuge to dramatically reduce total volume of drilling wastes to diposal and revover much clean fluids back to the mud circulation system.

Currently, the environmental protection is a basic policy of our country, to maintain social, economic and environmental sustainability coordinated development has become a strategic mission and objectives. As environmental regulations continue to improve and strengthen people's awareness of environmental protection, the relevant departments have worked out various environmental protection regulations will strictly limit the uncontrolled discharge of drilling wastes http://www.kosungroup.com/products/drilling-waste-management/ of completions.

The opportunities and the barriers for new technology are the same three elements discussed for all of the past, present and future treatment technologies.

The first barrier is operational. Any pollution prevention, recycling or disposal technology must perform to meet drilling operational or product requirements. Not every well is successfully drilled, and not every waste-management technique is successfully applied. In many cases, it takes several attempts to identify and address the operational needs of the particular region.

Drilling waste management (DWM) http://www.kosun.us/drilling-waste-management/ services provided by KOSUN Oil tools reduces wastes generated during drilling activities to acceptable environmental levels.DWM control was formed in 2010 to provide Solids Control and Environmental Solutions; addressing a growing need within the industry. Since then, we have grown to meet our customers' requests and today, we are pleased to provide a much wider drilling waste manegement equipment in addition to our Solids Control and Environmental customers. From Drilling to Production, we have you covered!

Decanter centrifuge http://www.kosungroup.com/products/solids-control-equipment/dc-series-de... is the special equipment of solid-liquid separation, designed by the characteristic of drilling fluid. It can accomplish each procedure of feed, centrifugal sedimentation, unloading, etc. it mainly uses for recycling barite, eliminating small solid, reducing the solid content of drilling fluid, controlling the density and viscosity of drilling fluid, ensuring the performance of drilling fluid, and play an important role in quick drilling.

KOSUN Hi-G Dryer http://www.kosungroup.com/products/drilling-waste-management/hi-g-dryer.... is used to recover cuttings from water-based or oil-based drilling fluids so as to lower the hydraulic proportion than 10% and significantly reduce the cost on waste discharge. It is proved to be particularly effective in recovering the oil-based mud cuttings.Drying Shaker is a kind of shale shaker which is mainly used for drying drilled solids , and the feeder is a little different from normal shale shaker.

KOSUN LS584-D Hi-G Dryer http://www.kosungroup.com/products/drilling-waste-management/hi-g-dryer.... adopts blue for the main machine body. It is equipped with four flat screens and high-volume integrated base collecting box. Combined with other equipment, it can form a set of water-based mud drilling waste management system for green drilling waste management and drilling mud recycling on drilling sites.