Linux kernel newbies em português

Hi-G dryer http://www.kosun.us/drilling-waste-management/vertical-centrifuge.html is popular used for water based mud drilling cuttings treatment. After Hi-G dryer, high speed centrifuge will be followed for further treating. After treated by centrifuge, solids parts can be used for construction; liquid part can be further treatment by flocculent unit. Hi-G dryer is also can be used for oil based mud drilling cuttings treatment; vice versa, vertical cuttings dryer can also be used for water based mud drilling cuttings treatment. Based on this, KOSUN design it’s vertical centrifuge which can be used for both WBM and OBM drilling cuttings treatment.

Benefits of Hi-G Dryer:
1. Reduce the volume of Solid cuttings that will require further treatment & reduce their treatment cost $;
2. Reduces the amount of cutting boxes needed on location & their rental cost $;
3. Reduces the volume of wet waste by returning recovered mud from wet cuttings to the mud system. (But first it should pass over the centrifuge to remove ultra fine solids (less than 5 microns).

Drying with High G Dryer:
Other second Drying Equipment for both Water & Oil base mud is the High G Dryer System:
1.Recovers up to 80% of cuttings, which could be solidified & safely used or disposed off.
2.Achieves 8 to 10 % Oil on Cutting (OCC %).

The KOSUN Hi-G Dryer Shaker is with long shaker deck big capacity which is used for drilling waste management to treat the drilling cuttings from the primary solids control equipments, like shale shaker, desander, desilter to dry the solids for transportation, and make the fluids easier for further treatment.