Linux kernel newbies em português

Hi-G dryer http://www.kosun.us/drilling-waste-management/hi-g-dryer.html is also can be used for oil based mud drilling waste treatment; vice versa, vertical cuttings dryer can also be used for water based mud drilling cuttings management. Based on this, KOSUN design it’s vertical centrifuge which can be used for both WBM and OBM drilling waste treatment.

KOSUN Hi-G Dryer Shaker http://www.kosungroup.com/products/drilling-waste-management/hi-g-dryer.... is with long shaker deck big capacity which is used for drilling waste management to treat the drilling cuttings from the primary solids control equipments like shale shaker, desander, desitler to dry the solids for transportation, and make the fluids easier for further treatment.The function of the HI-G Dryer is similar as Vertical Cutting Dryer.The Hi-G dryer not only ensured environmental compliance with DTI regurgitation but exceeded the operator’s own in-house target of 80 GMS/kg.

In recent days, eight Hi-G Dryers http://www.kosungroup.com/products/drilling-waste-management/hi-g-dryer.... designed and manufactured by KOSUN are ordered by an African customer and they are shipped to that market for drilling waste management in the area.The Hi-G Dryer has been proved to be extremely effective in recovering the oil-based mud cuttings. It is a kind of shale shaker mainly used for drying the drilled solids. The feeder installed on such hi-g dryer is a little different from normal shale shaker, so as to achieve the best efficiency.

KOSUN also have the H-I G Dryer Shaker http://www.kosungroup.com/products/drilling-waste-management/hi-g-dryer.... and Dewatering Centrifuges,Big Bowl Big Volume decanter centrifuge availalble for drilling waste management and solids control.The major benefit of the Hi G dryer technology, sometimes overlooked, is the elimination of whole mud losses from the shaker. This historically has ensured that the shakers were never run at their optimum capacity and thus the solids control system efficiency was adversely affected.

The hi-g dryer http://www.kosun.us/drilling-waste-management/hi-g-dryer.html independently developed and manufactured by KOSUN features with high G-force vibration intensity (adjustable) and excellent screening and drying effect. The frame angle can be adjusted from -1° to +5° via AWD angle adjustment system in continuous operation state. The liquid ratio of drilling cuttings can be reduced to below 10% after treatment, significantly reducing drilling waste discharge costs.

Hi-g dryer http://www.kosun.us/drilling-waste-management/hi-g-dryer.html can also be used to recover the oil-based, water-based and synthetic-based waste in drilling cuttings. Various number of hi-g dryers can be equipped as per the conditions at drilling site. The hi-g dryer independently developed and manufactured by KOSUN features with high G-force vibration intensity (adjustable) and excellent screening and drying effect. The frame angle can be adjusted from -1° to +5° via AWD angle adjustment system in continuous operation state.

KOSUN R&D team has considered application conditions on drilling sites worldwide and improved various functions for this upgraded and updated KOSUN LS584-D Hi-G Dryer based on the original product. It further meets ergonomic design principles and various operation requirements on drilling waste management site, and the product wins customers’ praise for its greatly upgraded practicability.

Zero waste discharge still remains a bit away after going through the previous four steps, therefore solidification, thermal desorption, cuttings reinjection and biodegradation will be utilized to push towards the goal as the last step. Hi-G dryer: KOSUN Hi-G Dryer http://www.kosun.us/drilling-waste-management/hi-g-dryer.html can recover water- and oil-based mud in drill cuttings with fluid phase down below 10% and remarkable reduction on waste discharge cost. It is especially good at managing oil-based drill cuttings.

KOSUN integrating both domestic and foreign advanced solutions and experience in well drilling waste management, DWM solids control http://www.kosun.us/solids-control-equipment/ has laid down an integrated solution for drilling waste treatment after repeated researches and experiments, which goes through four steps as reducing waste discharge at source, recycling waste water, recovering drilling mud, reprocessing waste by means of four-stage solids control system before realizing zero discharge of waste, offering high-quality drilling waste management services for projects.

Drilling waste management http://www.kosun.us/drilling-waste-management/ is to treat and recover the solids generated during drilling and finally meet environment protection and discharge standards in countries and regions locally. It can meet the requirement of unlanding treatment of drilling mud, effectively prevent environmental pollution, save drilling mud and reduce drilling cost. At present, there are many drilling waste management methods and devices with different treatment effects.