Linux kernel newbies em português

Vertical Centrifuge http://www.kosun.us/drilling-waste-management/vertical-centrifuge.html uses centrifugal force to dry drilled solids in oil or synthetic base fluids. A stainless steel screen bowl traps “wet” solids and accelerates them up 900 RPM. Liquid is forced through the screen bowl openings, while “dry” solids are extracted by the angled flights attached to the cone, which rotate slightly slower than the bowl. Tungsten carbide protects the flights from abrasive solids and ensures long operational life.

The vertical centrifuge http://www.kosun.us/drilling-waste-management/vertical-centrifuge.html makes its contribution with its innovative process after the shale shaker completes its task. Cuttings that pass over the shaker typically have an average of 30% to 50% ROC (Retention on Cuttings) when they enter the proprietary auger system and begin to cycle through the VERTI-G cuttings dryer.

Drilling waste management http://www.kosun.us/drilling-waste-management/ is to treat and recover the solid phase generated during drilling process to finally meet environment protection and discharge standards in countries and regions locally. It can meet the requirement of non-landing treatment of drilling mud, effectively prevent environmental pollution, save drilling mud and reduce drilling cost. At present, there are many drilling waste management methods and devices with different treatment effects.

As we tend to all grasp, vertical cuttings drier is that the principally used necessary instrumentation for drilling waste management. it's conjointly referred to as VERTI-G cuttings drier. KOSUN vertical cuttings drier http://www.kosun.us/drilling-waste-management/vertical-centrifuge.html has been well-tried with wonderful performances throughout drilling waste disposal method.

Drilling decanter centrifuge http://www.kosungroup.com/products/solids-control-equipment/dc-series-de... separation principle is to use high-speed rotating roller driven into the mud in the high speed rotating drum, mud was dumped into the wall to form a liquid circle, solid phased particles of liquid ring get greater than its own gravity for undreds or even thousands of times the effect of centrifugal force, will overcome the resistance of the slurry viscosity to the roller on the inner wall of rapid subsidence formed solid layer, liquid forming liquid layer.

KOSUN Vertical Centrifuge http://www.kosun.us/drilling-waste-management/vertical-centrifuge.html uses force to dry trained solids in oil or artificial base fluids. A stainless-steel screen bowl traps “wet” solids and accelerates them up 900 rate. Liquid is forced through the screen bowl openings, whereas “dry” solids ar extracted by the angulate flights connected to the cone, that rotate slightly slower than the bowl. Wolfram inorganic compound protects the flights from abrasive solids and ensures long operational life.

Drilling waste management aims to recover the solid phase which is generated during the drilling process, for the purpose of finally meeting environment protection and discharge standards. In such a way, it can achieve zero discharge of drilling mud, prevent environmental pollution and reduce the drilling costs.

The Hi-G Dryer (also referred to as dryer shaker) is used to recover drilling cuttings from water-based or oil-based mud, for the purpose of reducing the hydraulic proportion contained in drilling mud to less than 10% and greatly reducing the cost on waste discharge. The Hi-G Dryer http://www.kosun.us/drilling-waste-management/hi-g-dryer.html has been proved to be extremely effective in recovering the oil-based mud cuttings. It is a kind of shale shaker mainly used for drying the drilled solids.

In worldwide, the traditional cuttings dryer http://www.kosungroup.com/products/drilling-waste-management/vertical-ce... only apply to oil-based mud cuttings drying process, the drying process can not meet the requirements of the water-based mud cuttings. In use, since the paste screen problem frequently, resulting in cuttings dryer can not be effectively used in water-based mud drilling waste treatment process.

KOSUN will have more opportunities to make great contributions to the drilling waste management in China, with the establishment of “Xi’an Oil and Gas Drilling Waste Management Engineering Research Center”, The most attractive content in a DWM Solids Control http://www.kosun.us/drilling-waste-management/ research report officially released by this research center is “zero discharge of drilling waste”. Drilling waste management (DWM) services provided by KOSUN Oil tools reduces wastes generated during drilling activities to acceptable environmental levels.