Linux kernel newbies em português

The Hi-G Dryer (also referred to as dryer shaker) is used to recover drilling cuttings from water-based or oil-based mud, for the purpose of reducing the hydraulic proportion contained in drilling mud to less than 10% and greatly reducing the cost on waste discharge. The Hi-G Dryer http://www.kosun.us/drilling-waste-management/hi-g-dryer.html has been proved to be extremely effective in recovering the oil-based mud cuttings. It is a kind of shale shaker mainly used for drying the drilled solids. The feeder installed on such hi-g dryer is a little different from normal shale shaker, so as to achieve the best efficiency.

Benefits of Hi-G Dryer:
1. Reduce the volume of Solid cuttings that will require further treatment & reduce their treatment cost $;
2. Reduces the amount of cutting boxes needed on location & their rental cost $;
3. Reduces the volume of wet waste by returning recovered mud from wet cuttings to the mud system. (But first it should pass over the centrifuge to remove ultra fine solids (less than 5 microns).

Drying with High G Dryer:
Other second Drying Equipment for both Water & Oil base mud is the High G Dryer System:
1.Recovers up to 80% of cuttings, which could be solidified & safely used or disposed off.
2.Achieves 8 to 10 % Oil on Cutting (OCC %).

KOSUN LS584-D Hi-G Dryer has been upgraded by its R&D team on the basis of original product by integrating the application conditions on drilling sites worldwide. Its various functions are improved. Besides, it can meet ergonomic design principles and various operating requirements on drilling waste management sites. Therefore, such Hi-G Dryer wins the customers’ praise due to its excellent performance.

The main body of KOSUN LS584-D Hi-G Dryer is blue, with four flat screens installed on it. A high-volume collecting box is equipped. When used together with other drilling waste management equipment, such Hi-G Dryer can constitute a whole drilling waste management system to achieve the purpose of green waste management and drilling mud recycling on drilling sites.