Linux kernel newbies em português

The correct use of vsi sand making machine can not only improve the service life of the equipment, but also reduce the small problems in production, improve production efficiency,to create the greatest economic benefits for users. Here we will explain how to correctly use the sand making machine.

1, check adjustable vortex chamber observation door is closed, to prevent the material from the vortex chamber observation door out, danger.

2, check the impeller rotation direction, from the inlet direction. The impeller shall rotate counterclockwise, otherwise the motor wiring should be adjusted.

3, crushing machine and conveying equipment start-up order: discharge, crusher, feeder breakers must be no-load start, the crusher is operating normally before feeding. Stop order and boot in reverse order.

4, feed particles in strict accordance with the provisions of requirements, prohibition is greater than a specified material enters the crusher, otherwise, unbalance and will cause excessive wear of the impeller impeller, impeller and channel blockage caused by base to the center feeding tube, the crusher can not work normally, eliminating large feeding should be found and when.

5, discharging equipment to stop, should promptly stop feeding, otherwise, will cause the death of impeller, burned motor.

6, strive for continuous and uniform feeding.

7, crusher in the process of operation, no vibration and abnormal noise, otherwise, it should stop checking.

8, machine lubrication

Lubrication for dry oil lubrication, sand making machine every class, adding grease, some working class, open the main bearing main bearing cleaning, replacement of bearings when necessary.