Linux kernel newbies em português

Buyers to our consultation, said he utilised sand making machine for three years, normally seem in significant vibration function lately, repair personnel can not obtain a specific explanation. To be able to aid these customers, small sums up the causes why some sand making machine vibration and the corresponding option, and I hope to help the user.
(1) the hammer installation error of sand making machine upkeep assembly. Hammer for face turn when in use, to prevent rotor loss of balance, sand making machine hammer all really should be taken for face turn, otherwise it is going to produce intense vibration in operation.
(two) corresponding towards the two group in the hammer weight difference of more than 5 grams. Elimination process would be to adjust the weight on the hammer, the distinction of two groups of weight much less than 5 grams.
(3) person hammer card as well tight, not throw operation. Might be shutdown following the hand rotating observation, consider of strategies to create the hammer rotates flexibly.
(four) the rotor on the other component weight is balanced, then the must cautiously check the adjustment of balance.
(5) the bending deformation of your spindle. Solution alignment or replacement.
(six) the bearing clearance limit or damage. The replacement in the new bearings are commonly made use of to solve the problem.
(7) bottom fixing nuts will not be fastened or running loose. The answer is fastening.
The above approach, hope to help the user, if there don't fully grasp exactly where you can get in touch with my organization.