Linux kernel newbies em português

We all know that a high performance automation equipment is Raymond mill, Raymond Mill appeared for many companies so as to save the manpower, material resources, financial resources, Raymond mill, to allow employees to improve work efficiency, and use, the normal operation of Raymond mill and control circuit is reasonable, can not be separated.

Raymond Mill realize automation equipment needs which points do?

The first: first in the vibrating feeder after installation is complete, the next in the positioninginterface next to the screw loose, then loosen screw, and then open the rear cover of electromagnetic vibrator, put all the screws tightened in, then cover on the cover;

Second: test whether electricity, open the control box, will increase continuously inside the amplitude, probably in about 1.9 mm, the current should be in 1.2 in Ann, working continuously for hours, have a look the current is normal; if the normal open the bunker gate material, to see if the current material quantity is normal, the is allowed and the amplitude decreased about 0.4 mm, if the amplitude current reaches the rated value is  not yet satisfied the feeding quantity requirements, then the appropriate move equipment, adjusted to meet the requirements of the feeding quantity.

Third: Raymond Mill need automatic feeding, to save manpower, automatic feeding through to the main current. When the normal operation of the machine, if will be the main motor current exceeds a rated current stop feeding, if the current decline will automatically feed.This is mainly through the current relay action disconnect and connect control voltage, to feed and feed. To start the automatic feeding, the need to control the doors on the main switch toautomatic position. Then gradually increase the current, achieve the stable current, if the current is decreased slightly we closed immediately.