Linux kernel newbies em português

KOSUN drilling fluid Hi-G shaker recovers drill fluids cuttings from water-based and oil-based drilling fluids, it can make the proportion of the liquid phase in the drilling to below 10%, can significantly reduce the cost of the waste discharge, and is particularly effective in the oil base mud cuttings.

Features & Benefits of Hi-G Dryer
1. G-force linear motion up to 8 G.
2. Hi-speeds conveyance.
3. Enable shaker to process heavier cutting loads.
4. Shaker feeder can be weir type and header box.
5. Hoop-strip screens can be PMD and PWP screen.

Hi-G dryer shaker has long shaker deck and large capacity, and it is designed for drilling waste management of drilling cuttings from primary solids control equipment such as shale shaker, desander and desilter. KOSUN product can dry the solids for transportation, and then further treatment for the fluids is able to be executed. Its screen area is 2.7/29, and the screen length on the deck is 2550mm with 3 panel shaker screens. This equipment is able to run at 7.5G, and the G force can be set at different values according to specific working condition.

In addition, the vibration mode is linear motion, and BEM is an optional choice. After the drilling mud cutting is processed with our Hi-G dryer shaker, the fluids will be treated by the oilfield decanter centrifuge. In this way, the useful drilling mud is recycled, and the cutting disposal cost is also cut down.