Linux kernel newbies em português

Sand production is a traditional saying of Sand making machine production capacity, production will generally Sand how many tons / hour to calculate, say, in units of time out of the sand and gravel produced volume. Therefore, to improve the Sand production (production capacity), the main unit is to increase the number of times within the crusher produced by the amount of sand and gravel, to do that, so long must yield to the constraints Sand some factors to do something about.
General speaking, which restricts how much sand making production factors are varied, but the overall point of view above is mainly about these aspects:
1. The composition of materials: sand in front of materials containing more fine sand more impact, because these adhesion of powder easily transported. In this regard depends on the mechanism sand plant detailed requirements may be, if no special requirements, the general fineness of the material will be made for the fine can be set
2. The hardness of the material.
3. The viscosity of the material: that is, the viscosity of the material, the more easily adhered. The viscosity of the material in the Sand will adhere to the inner wall of sand chamber, if not promptly cleaned, it will seriously affect the efficiency of Sand, will also affect the normal operation of the severe Sand. Harder materials sand up the problem, but the more severe wear and tear on equipment.
4. humidity of materials: the larger the moisture-containing material, the material easily stuck inside the Sand, but also easy to plug the next conveying process, resulting in the ability to reduce the sand. So, the choice of materials, be sure to pay attention to the viscosity of the material is not too large. So much for the fines content of the material should advance once sieve.