Linux kernel newbies em português

People may meet various problems during the operation of jaw crusher concrete mixer price mobile block machine, so the following illustrates some solutions to those common problems.Henan Daswell Machinery is a professional manufacturer of mining machine for almost 30 years in China. We are dedicated to supplying our customers with best service and products, our major products include:Diesel Concrete Mixer,concrete mixing plant,mini concrete pump,If you are interested in our products, please contact us freely: sales@daswell.com Fault phenomenon 1): Host sheave and movable jaw can work normally, but it cannot proceed the crushing task. Reasons: 1) stretched spring cracked 2) the pull rod cracked 3) the toggle plate fell off or cracked. Solutions: 1)change the stretched spring 2)change the pull rod 3)reinstall or change the toggle plate. Solutions to some common problems of the jaw crusher Fault phenomenon 2): the output can't reach to the ex-factory standard. Reasons: 1)the materials' hardness or tenacity to be crushed is higher than which is regulated in the directions. 2) the discharging port is smaller than the specified limit. 3) the jaw plate dislocates so that the jaw crest is against to the jaw crest. 4)the voltage on the workplace is too low. 5)after abrading, the gap between the movable jaw and the bearing is too excessive leading to the outer circle of the bearing's roll relatively. Solutions: 1)replace or add a crusher 2)readjust the discharging port to the specified limit and add a crusher used for fine crushing. 3)examine the pitch size of the jaw plate and replace the jaw plate if it doesn't confirm to the standard. 4) turn up the voltage on the workplace to make it suits the requirements of the motor load. 5) replace the bearing or the movable jaw.