Linux kernel newbies em português

The Raymond grinder mill produced by Henan Hongxing Mining Machinery Co., Ltd. adopts advanced structure of the same products in the domestic and foreign market and is upgraded and improved on the basis of traditional Raymond grinding mill in the same industry. Compared with ball mill, this milling equipment has higher efficiency, low electricity consumption, small floor space and small one-time investment. The grinding roll tightly presses on the grinding ring under centrifugal force; for this reason, when the grinding roll and the grinding ring are abraded, the output and the fineness of the final products are not influenced. If you can solve the following problems well, there will be a big advantage to extend useful life of accessories.1. in the production process you will find that output size have been adjusted already, but now the product particle size is becaming larger.The cause is the loose belt which easily lead to the product particle size become larger. Solution: Tighten the belt and adjusts other parts corresponding.Then the particle size can achieve a satisfactory product.Raymond mill" />2. sometimes encountered mill bearing locking cylinder (brake step up the tire so much that there is not relative motion between the tire the brakes), this is more trouble, but the operator must be not panic, cut off power then do careful examination.The reason may be: bearing over-heating; the bearing damaged; bearing short of oil or dust into the body. Then please follow the corresponding maintenance method following: If bearing overheating, let the machine to stop a break. If bearing is damaged, only pay close attention to the replacement of the bearings, so as not to damage other parts. Check, clean and oil the bearing.3. the mill"s body shake ceaselessly. Take it easy and cut off the power, then check. The problem may have three reasons: no fastening parts; the curving spindle resulting in part weight imbalance; corner cap screws loose. Solution is very simple: check of each part firmly; replace the spindle and carefully examine and adjust the balance; the screw cap tightened.If you are interested in Ramond pulverizer for sale, you can contact or visit Hongxing Machinery: sales@hxjq.com.clinker grinding station: http://www.chinaquarry.com/products_show/preheater.html