The Operation Attention of Asphalt Mixing Plant

Continuous Asphalt Plant is a complete set of equipment for the mass production of asphalt mixtures. According to the mixing method, it can be divided into intermittent and continuous asphalt mixing plant. In accordance with the movement, it can be divided into stationary, semi-stationary and mobile asphalt mixing plant. The equipment can be used to produce various asphalt mixtures, which can completely meet the requirements of the construction of highway, municipal roads, airports, ports and so on. However, there are also some matters that we should pay attention to in the operation process.
Firstly, operators should start the asphalt mixing station, and race the machine in empty. Check the operation condition of asphalt mixing plant, and the machine can be put into normal operation when every part of the machine is in good condition.
Secondly, operators should concentrated on the operation of the machine, and observe each instrument carefully, such as the indicator, belt machine, dispenser and etc. Stop the machine immediately under operation breakdown and emergency. At this time, the power supply should be totally cut off.
Thirdly, operators must strictly comply with the correct operation procedure and specification. If there is any operation breakdowns, the machine should be maintained by professional operators.
Then, non-operating person is strictly prevented from entering into the production area of asphalt mixing plant. In addition, the opening and lubrication of the safety and mixing cover are strictly prohibited in the operation process. No tools and sticks can be put into the mixing drum to discharging or cleaning. When the hopper is lifted, it is forbidden to work or walk on the bottom of the hopper.
And also, the high altitude maintenance of asphalt mixing plant must be handled by more than two operators, and they should be equipped with safety belt and necessary safety protection. Besides that, the high altitude maintenance of asphalt mixing plant should be totally avoid in bad weather or working conditions.
Finally, the operators of asphalt mixing plant must wear a helmet in the working process. After production, the power of RD60 Asphalt Mixing Plant should be cut off, and the operation room should be locked.