Linux kernel newbies em português

Blue Metal Quarry Crusher has many kinds, through different Blue Metal Quarry Crusher internal structure is different, as well as on crushing way different, through the research analysis, we distinguish four kinds of broken gravel crusher, smash, crush, splitting crushing and grinding four broken way.

1, break. This fragmentation is instantly boost to the material a crushing effect, grain of material from the rotor obtained great speed, and the speed is very fast and other granular material or material cushion collision, by the impact of particles along the inherent crack crush or caused by particle shattered the broken forms usually makes granular material is square. Impact crusher, impact crusher, hammer crusher and so on are the representatives of the broken way.

2, crushing. Blue Metal Quarry Crusher mode is a constant process of accumulation. In the crushing cavity material layer due to the extrusion and impact, the granular materials under pressure, this pressure can make particles with internal crack growing. When reaching the material to withstand the maximum limit when the material will be broken. The characteristic is that the scope of action of force is bigger, can spread to the whole particle. On behalf of the equipment with jaw crusher, cone crusher and roller crusher, etc..

3, broken. Split form is broken broken strength in the material particles between the supports. The operation state of the material in the crushing cavity is very confusing, because the particle of the material is different in shape, the material is supported on one side, and the other side is affected by the impact force. It is characterized by the scope of the role of the force is more concentrated, local rupture occurs. Hammer crusher and impact crusher are more commonly used in this way of breaking.

4, grinding and grinding. The broken form is the friction between the material particles and the particle becomes smaller. Due to crushing cavity material density larger, inter particle friction between every moment are in. Therefore, it is inevitably enable particle material by grinding and grinding this role makes smaller particles falling from the larger particles. The characteristic is that the surface of the particles is relatively moving, and the shear stress is produced. High pressure grinding Raymond mill, grinding machine is the main equipment at present.

There may be at the same time in the operation process of the Blue Metal Quarry Crusher, but generally divided into main and secondary broken forms. In addition, the break occurs mainly between the larger particles; chop into pieces and crush model is mainly occurred between the large particles; grinding is all the broken material particles will occur; grinding mainly occurs break between the small particles.