Linux kernel newbies em português

For vibrating screen users and manufacturers, the net cost would be a considerable expense each year. Therefore, in order to make full use of the net of the vibrating screen and try to prolong the life of the net mobile crushing plant malaysia, experts from our company will list the main factors that may cause the vibrating screens net easy to be broken. Knowing about the reasons will help both users and manufacturers to take proper measures to prevent the unnecessary problems.
1. The first main reason that leads to the breakage of the vibrating screens net is the net quality. If the materials which are used to make the screen net are not qualified, we will use the poor quality net in the real production and operation. Then its common for us to see that the net is damaged in a short time.
2. If the tensioning degree of the vibrating screens net mineral processing spiral classifier, it will result in the vibration problem of the net, thus causing the net edges broken or damaged.
3. The vibrating screens net is made up of the upper screening layer and the lower bearing layer. The two layers contact each other quite closely in normal condition. If the net is tensioned to an inappropriate degree, the screen net will vibrate with large amplitude because the upper screening layer is loose while the lower bearing layer is too tight. In this case, its also easy for the net to be broken.
4. The method of feeding materials is another reason that may cause damage to the vibrating screens net. The feeding process is mainly finished when the vibrating screen is working. Too much materials fed at one time will prevent them from moving normally on the screen net, which will make the net become loose and lose the initial handling capacity of the materials.