Linux kernel newbies em português

Sand making machine applicable to crush soft or hard and ultrahard material, plastic, widely used in all kinds of ores, cement, refractory materials, aluminum where soil clinker, carborundum, glass raw materials, mechanism building sand, stone and various metallurgical slag, especially for high hard, hard and wear-resistant materials, silicon carbide, corundum, sintered bauxite, beautiful sand, is higher than other types of crusher yield effect.
sand making machine in the production process, there is a certain body swing, but the amplitude is small, if the body is particularly dramatic swing, then there may be three reasons:
(1) it is possible that the wear of the wearing parts of the crusher impeller is very serious. If the impeller wear serious wear will cause the internal operation of the sand making machine is not stable, resulting in a large swing, this time as long as the more vulnerable parts, so that the internal impeller of the sand machine to achieve a balanced state;
(2) may be caused by a large number of equipment to swing through the large, sand making machine in the design, the maximum feed size is generally 4 to 5 cm, in general, the device into the grain size in 4 to 3 cm when the product can reach up to, if the feed is too large, if the feed is too small, the impact is not sufficient to meet the full amount of sand;
(3) the sand making machine may also be an obstruction of the impeller flow channel, if the impeller flow channel has a blockage of the words will cause the feed is not uniform, the body is too large, as long as the obstruction on the impeller flow can solve the problem of large swing.