Linux kernel newbies em português

Hi-G dryer is also can be used for oil based mud drilling cuttings treatment; vice versa, vertical cuttings dryer can also be used for water based mud drilling cuttings treatment. Based on this, KOSUN design it’s vertical centrifuge http://www.kosungroup.com/products/drilling-waste-management/vertical-ce... which can be used for both WBM and OBM drilling cuttings treatment.

The following description will focus on the basic construction and spare parts of the Hi-G Dryer. It consists of shaker base, shaker frame, electric panel, shaker basket, shaker feeders, electric motors as well as shaker screens. When the shaker starts, under the driver of the motors, the vibration beam vibrates in certain rate and the beam then brings the shale frame vibration, which finally generates the whole shaker moving.

The main body of KOSUN LS584-D Hi-G Dryer is blue, with four flat screens installed on it. A high-volume collecting box is equipped. When used together with other drilling waste management equipment, such Hi-G Dryer can constitute a whole drilling waste management system to achieve the purpose of green waste management and drilling mud recycling on drilling sites.

Hi-G dryer shaker and vertical centrifuge can be introduced as drill cuttings usually take away much drilling mud and thus raise drilling cost. Hi-G dryer manages oil content and water content down to 10% from 30% while vertical cutting dryer lowers oil on cuttings below 5%, to the greatest degree, with small rotary speed and centrifugal filtration. Either of them is effective to recover drilling mud and shrink drilling cost.