Linux kernel newbies em português

1. Solid wood flooring: First mop the floor surface to remove dust, dirt and cleaning agents in accordance with the degree of matching description and the floor, in a bucket of water diluted with an appropriate amount, and the wet mop, the direction toward the door of the room side mop. Note, however, to try to wring the mop to prevent excess moisture from penetrating into the wood floor in the layer, causing mildew, rot. If you want to keep the shiny wood floors, consider then a layer of wood floor wax, but pay attention to dry and then wax the floor, etc., to avoid the wax can not fully attached and appear white.
2. plastic flooring: vinyl avoid water, cleaning agents, water and glial easy from a chemical reaction, causing the floor surface degumming or tilt phenomenon, we should not have a lot of water, especially hot water mop. It appeared stained with ink, soup, oil stains, generally wipe with diluted soapy water, as also wipe dirty, gently wipe can also be a small amount of gasoline, until the stain removed.Interlocking decking boards Canada
3. Stone Flooring: natural stone floors due to a natural water absorption, so the need to select a pure pigment pollution neutral detergent, try to avoid direct contact with the surface of acid chemicals. Granite or terrazzo plate surface can be rinsed with water, but the best marble slab surface dry drag, drag and it is not even wet water spray or brush. As for the tiles, glass fossils artificial stone floor, if a small amount of water stains or stains can be cleaned with a damp cloth and a small amount of detergent to remove; strong stains, cigarette burns or a few nicks available plus cleaner to remove fine sandpaper. If the initial installation floor wax protective wax should be used to wax water, or ground floor was always dirty drag dirty.Concrete Steps Composite Porch
The tile flooring: tile often be greasy, water, rust, soap scum and other contamination, especially in more filth tile seams. To keep clean without damaging the porcelain surface bright, multi-functional cleansing cream can be used for cleaning. As for the tile gap at, you should first use a toothbrush dipped in a little detergent paste to the dirt, then use a hair brush in the crevice can be a waterproofing agent, so that not only capable of preventing seepage of water mold growth.
outside flooring for decks