Linux kernel newbies em português

Pay attention to the paving method and process flooring can be laid out healthy
With the improvement of people's environmental awareness, more and more people realize how important it is to a healthy living environment, therefore, in the process of home renovation, environmental protection naturally became a topic of particular concern. From an environmental indicator of decoration materials, furniture and furniture have become people's level of environmental protection, "the initial installation required course." In fact, the purchase of environmentally friendly goods is only a start, and then we need to do is to introduce environmental protection technology renovation process.
Floor is really green floor green technology
For the floor, our general view is solid wood flooring is more environmentally friendly than the laminate flooring. However, if the floor is not enough green paving process, even if selected environmental performance of solid wood flooring, the result will still cause indoor pollution. So, what kind of technology they are regarded as floor coverings environmental protection?acoustical panels immitation wood facing Belgium
Suspended pavement law good clean and easy maintenance disassembly
Suspended paving method biggest advantage is that it does not use glue fixed on the ground floor, between the tongue and groove floor can do without glue, so do not worry formaldehyde and other ingredients contained in the gel cause indoor pollution; secondly, it laid the program is simple and fast. Since the ground floor are suspended in splicing, so when the local board from the seam or partial accidental damage, easy to repair replacement; after moving or running water accidents floor was soaked, remove the dried floor still available for the second shop wear, very cost savings. At present, this non-gel suspension of floor coverings method is a more scientific, economic and environmentally friendly pavement method, just to remind consumers that if you plan to use this paving way, then to the floor as much as possible in the selection of the time select those tight tongue and groove bottom seam smaller floors.
Equally important testing process before floor coverings
Before floor coverings, the surface must first be treated that is the basic unit surface, usually check the flatness and surface moisture content of grass. Higher base flatness requirements, should be less than 2-3mm, and moisture content should generally not exceed 20%, if the use of geothermal heating, then the moisture content is preferably not more than 10%, after the flooring or not compliance. In addition, if it is in the building on the ground or laying floor bungalow, the need for water in the primary layer processing.outdoor carpeting over concrete patio
After grass surface inspection standards, it should be laying cushion (wood floors can also be a number of insect powder sprinkled on the ground to protect the floor). There are many bedding material, it can be referred to as a foam pad moisture pad, about the thickness of about 3mm, with plastic film, laying docking interface plastic. You can also use foreshadowing Po, the general election 10-12mm thick, butt laying plastic interfaces. In addition you can also select high-quality multi-layer plywood cushion. The main purpose is to make the cushion to play the role of moisture, of course, it can help increase foot feeling.
After everything is ready on the floor of the pavement can be, if it is solid wood flooring, then the pavement even before the formal use of the floor space within a roughly rolled to do color separation pick, try to close the color of the floor bolted together . In addition, to put the wedge between the floor and the wall, leave enough expansion joints, relatively dry winter indoor pavement, expansion joints should stay small for some, but when the air is more humid summer pavement, expansion joints will have to leave some.
Pavement maintenance is completed and be careful to check the floor leveling
After completion of floor coverings, consumers do not forget to personally walk on the floor, test to see whether the formation of floor coverings, stitching is solid, with or without hollowing sound.waterproof decking vinyl

e this method.