Linux kernel newbies em português

"Three quality seven installation" - this is the floor in the industry often say, which explains the importance of the installation of the floor. Metropolitan Home recently received a lot of readers call, we talk to the various problems of their own floor. Reporters found that after finishing calls, a lot of readers at home floor as "failed" because the installation is not in place caused. This issue, we will floor improper installation problems sorted out, and give solutions, hoping to give readers more information.replacing tongue and groove porch boards primer
Lily King Power Dekor Beijing Branch Customer Service Manager pointed out that many seemingly belong to the floor product quality, in fact, mostly caused by improper installation, one mistake is likely to cause to the entire rework.
Floor deformation or seizing board
Description: The floor deformation or seizing board
The crux: When installing the floor, you should use mulch. If the film does not seal well, ground water will swell in excess of local floor, the upper and lower surfaces of the expanded volume appears unbalanced, there will be tile Alice and local cracking phenomenon.
Solution: For local minor cracking dashboards can be surface repair, partial replacement can be serious.
Mutual detachment between the floor
Phenomenon: mutual disengagement between the floor and the floor open.
The crux: 1 because the floor has a shrinkage of the swelling properties, the wet summer, winter heating baked northern region, the situation may occur in winter for fixing floor springs lose thrust or inadequate thrust, etc., will volume expansion of the floor can not be restored in situ summer, leading to a gap appeared between the plates; 2. Before installing the floor, if uneven concrete floor will lead to a gap occurs between the floor plate.
Solution:
1. Replace the spring and the floor with a bridle reset;
2. After re-laying ground-leveling.lowes wood plastic composite board Canada
The floor bagging
Phenomenon: Floor local bagging, drum kits, stampede have suspended or empty feeling.
. Crux: 1 construction workers due to insufficient floor joints reserved bagging; 2 in the room longer than 8 meters of space, there is no bar or increase plus transition stretch stitch reserved bagging the pavement caused.
. Solution: 1 increase around joints, requires cutting neat; 2 span the room required to install the transitional buckle in place.
Seams rupture or stretch film edge
Phenomenon: the case of rupture or stretch film side seams floor and the floor appears.
Crux: 1. During installation, tapping the plate uneven or uneven force, leading to local slight stretch side and fracture phenomena; 2 telescopic crevice insufficient reserve installation, after slight camber inflation extrusion, resulting in local friction personnel move stretched side.
Workaround: Slight wax available patches to repair damage, serious chip can be replaced.
Floor walk up, there sound
Phenomenon: Floor stampede abnormal sound. . Crux: 1 crude uneven ground, and the installation process is not for the uneven ground processing; 2 installation process does not use adhesive glue or glue during installation or use less sizing the wrong place, or do not play connection. the role of fixed joints, resulting in the emergence friction generated between notch sound; 3. floor surrounded by slit reserved insufficient or no mats sealed, resulting in partial or total floor after expansion bagging notch fluctuate produce friction sound.
. Solution: 1 floor demolition, leveling the ground and then re-install; 2 will dismantle playing rubber rear floor resurfacing; 3 because the mats do not seal well and cause the floor to swell slightly deformed, you can glue construction played. , severe deformation of the partial replacement of the new board.wholesale Eco-Friendly Floor