Linux kernel newbies em português

If the house is solid wood shop floor, the ground must always want to keep bright as new, more want maintenance to extend the life of the floor. However, due to different manufacturing processes of the floor, there is lacquer wood floors and solid wood floor oil wax points to determine the curing method is not exactly the same, in addition to different levels of fouling also determines the conservation practices are not the same. Wenzhou Jinyi floor marketing center in addition to provide you various styles of wood floors, today also provide some maintenance wood flooring methods and procedures.
Whether lacquer wood floor oil wax or wood floors, daily cleaning, you can use a vacuum cleaner to clean up, and then after a soft cloth moistened with special detergents or soap flakes dilution for cleaning. For cleaning large areas, can be used sprayers or rotary cleaning machine. For lacquer wood floors, water it does not do any good, you want to minimize the excess water cleaning, be sure to scrub rag wrung. The solid wood floor oil wax to remove the black rubber grinding marks and other dirty water can not be removed with a soft cloth dipped in a low concentration of alcohol wipe or a little white wine.
Lacquer wood floors: After the floor is clean, it should be coated with a dilute floor polish. If the floor is relatively frequent usage may be appropriate to increase the concentration of polishing agent. Under normal circumstances can conserve the living room once a month, and frequented the kitchen, living room and other maintenance is required per week.built in patio bench plans
Waxy solid wood flooring: the floor is completely clean and dry, then coated with a thin layer of the floor surface light oil wax, floor polish with a soft cloth and wipe off excess oil stains to avoid bright spots. Gas oil wax coated floor do not rush to use, should be dry naturally in the evening.
After a long period of use, lacquer wood flooring wood floor wax or oil dirt will be difficult to remove by conventional cleaning methods, different situations have different solutions.who sales wpc in idaho
Lacquer wood floors: the local board because a lot of fouling becomes difficult to clean, use a degreasing agent and warm water 25 �� is mixed before use degreasing agent, flooring should be fully cleaned. For too severe fouling floor, wood flooring surface should be polished off, and then re-painted, but this method should be a last resort, because inevitably make floor polish thinner.
Waxy solid wood flooring: If a large area of ??floor stains, equipped with a dry soft polishing pad grinding machine for processing, in order to maintain consistency gloss, but it must be applied within 4 hours of light oil wax floor surface, Let the floor dry naturally after 16-24 hours.discount outdoor patio tiles