Linux kernel newbies em português

In offshore and onshore drilling projects, in order to meet the drilling mud and drilling waste processing needs without landing, the process of drilling solids control equipment failure due to the loss of mud, the separated solids control equipment of drilling waste, wellsite rig move and history untreated drilling mud and drilling waste backlog Origins.

KOSUN vertical cuttings dryer http://www.kosun.us/drilling-waste-management/vertical-centrifuge.html, which can effectively deal with water-based, oil-based and synthetic-based drilling fluids and drill cuttings generated extremely dry, reducing emissions cuttings recovered a large number of drilling fluid, reducing drilling costs, while protecting the environment.

Features and Benefits of KOSUN VC-2000 Serise Vertical Centrifuge
1.Efficient solid-liquid separation. Liquid content of treated solids is up to national and industrial standards.
2.Effective recovery of treated liquid for recycling in drilling solids control system.
3.Greatly reduce solid discharge volume, drilling fluid cost and waste management cost.
4.Meet field operation requirements on zero discharge of drilling waste.
5.Rotate at a high speed of 900RPM to generate a centrifugal force of 430G and effectively separate liquid from cuttings.
6.Flights coated with wear-resistant material and metal screens for longer service life.
7.Intelligent pulse jet control system effectively prevents screen blockage.
8.Separate oil circuit lubricating and cooling system for simple and reliable operation.
9.Integrated programmable control system for safe and convenient operation.
10.Feed/discharge ports can be equipped with screw conveyors to facilitate drilling cuttings conveying and continuous equipment operation.

Water-base/oil-base mud cuttings enter the top hopper of vertical centrifuge and fall onto its internal separation area. The internal cone rotates at a high speed of 900RPM and generates a centrifugal force of 430G. For density difference between liquid and solids, mud is hurled out of surface of drilling cuttings and passes through screens, and solids are retained inside the screens. And then, liquid is discharged from the liquid outlet and dry solids are discharged from the bottom of equipment.