Linux kernel newbies em português

Sand making machine is a professional production of sandstone aggregate machinery, from the point of view of the customer, and use the price to buy the vsi sand making machine  must be capable of overall with high performance, high efficiency and high quality for themselves provide good earnings to meet customer demand. However, to meet this demand, the overall performance and quality of sand making machine is very important, and secondly, it needs to be installed and debugged. How to install the correct installation for most customers is not very understanding, the following is our professional installation experience in the past to provide you with professional installation and commissioning knowledge.

(1) the sand making machine is installed on a concrete foundation or steel structure, and the foundation shall be able to bear four times the overall quality of the machine.

(2) when the sand making machine is installed in the workshop, the concrete foundation should be used to reduce the height of the whole machine and save the installation space;

(3) when the sand making machine is installed in the open air, it can be used to select the high steel structure bracket and improve the sand making machine height, which can be used for the layout of the material system.

(4) when the sand making machine is adjusted, the main shaft and the horizontal plane of the sand making machine can be adjusted.

(5) above the sand making machine should set the lifting equipment, the ability of sand machine is the biggest quality consideration. At the top of the sand making machine should be left the lifting space. On one side of the sand making machine leave adequate space and maintenance has been prepared.

(6) prior to the installation of the machine, check the components in the process of transportation, and the spare parts and spare parts are complete.

Debugging of sand making machine:
Important note: General in the equipment before leaving the factory, we will the sand making machine, after up to 8 hours of strict testing machine work, ensure sand making machine each part and the whole smoothly through the normal standards in order to factory, but according to the actual demand, sand making machine after the installation is complete must be after a thorough examination, perfect equipment run after the investment production, sand making machine inspection work is as follows:

(1) check the lubricating oil pipe is connected to reliable, before and during the test run should be to add oil, add 3 lithium based grease or molybdenum disulfide grease;

(2) check the connecting parts of each component, should be firmly and reliably, carefully check whether there is a foreign body, if there should be timely cleaning and removal.

(3) check whether the motor connection is correct and whether the voltage is normal.

(4) before installing the drive belt to move the motor, the rotation to be with system sand machine signs consistent, namely from the feed inlet impeller inverse clockwise, if the opposite direction signs should be adjust the motor wiring, the direction of rotation to the sand making machine direction consistent.

(5) for a dual motor drive, the main shaft assembly and two motor, respectively, with the same number of V with the same number of V belt tension should be adjusted to the same and flat. After the inspection, the air load and the load test must be carried out before the transfer of the production.

Above installation and debugging knowledge is to in the absence of professional and technical personnel to install to you as a reference, we sand making machine manufacturers in customer buying equipment will be tracking service, installation, commissioning, accessories, limited warranty and other after-sales service, for customers to provide cost-effective equipment, let customers use assured smoothly is our responsibility.