Linux kernel newbies em português

SCM impact crusher machine is one of the most commonly used mining equipment, the use of back-breaking is to be able to break the rock hardness up to 78, some customers in the use of the process to consider what action can be under the impact crusher for crush, first this view is wrong, feeder feeding process inevitably have iron or harder material into the crushing chamber, this may cause the crusher vibrating unstable approach is shut down and clean the interior SCM impact crusher machine, if this trend continues for the back-breaking vibration instability ignore it, brute force will hit the liner or other components fasteners relaxation break. There may cause instability crusher vibration, for example: when the rotor rotation can not achieve balanced operation; fixed how to configure impact crusher in mineral production line bearing screw or loose screws and other reasons, there is a problem when you can be, according to some routine checks check and re-install the plate hammer assembly, rotor balancing, tighten anchor bolts and bearing screws.

impact crusher Problems
1. Due to the high coal production, crushing heavy task, SCM impact crusher stone crusher roll each drive motor is 15KW, belt use is type A, the handling capacity of SCM impact crusher stone coal to keep up with more than 80mm in diameter broken by election chunks of broken election after crushing machine, stone how to deal with impact crusher blockage in the working process led to SCM area with frequent burning, and even lead to the distribution chamber contacts the top off, SCM impact crusher machine and the procedure for various reasons did not install lockout, SCM impact broken stone infeed chute inside accumulate a lot lump was found after the accident to be handled manually, that is a waste of manpower, material, and delayed production.

2. SCM impact crusher stone tile filling hole in the side of the seat, and the Nevado Bearing seat injection hole inner wall tile from there 80MM distance inject a lot of butter, but they inject into the inside wall and the bearing seat watt space between the bearing lack of lubrication, over time, lead to bearing damage.

3. SCM how to prevent gypsum impact crusher equipment get rusty stone machine is a vertical pin pin gear shaft and belt wheel, if the pin is not installed correctly, and the gap is at the cutting axis tooth belt rollers and not on wheels, roller pin stuck in the teeth inside, hard to repair: If the pin is installed correctly, and the gap is at the cutting tooth roller shaft and belt wheel right on the average daily cut pin number more than 10 times.

Transform SCM impact crusher machine
1. The transformation of the electric motor, belt and belt wheel due to production needs, crusher motor increases from 15KW to 17KW, increase the width of the belt round belt slot, belt angle widened from the original A-type band broadening for B-type horn band.

2. Note the location of the hole transform SCM impact crusher stone tile filling hole position by the side of the seat to the top position of the bearing seat, which has been the channel filling hole inside the bearing.

3. Pin position on the transformation of SCM impact crusher stone vertical pin by pin and toothed belt wheel roller belt to cross pin wheel. This pin can cause damage to the tooth roller, only periodic replacement of the copper sleeve roller belt between the wheel and the teeth.

After several jobs in the above transformation, crusher after nearly two years of production and operation, to good effect, to solve all the problems of poor transformation of the former impede production.