Linux kernel newbies em português

In order to guarantee the high efficiency machine during the work, we must do a good job of  sand making machine maintenance work on equipment maintenance, need to do what.

First of all, we should pay special attention to the various parts of pebbles and sand making machine is working properly. Look at the bearing oil temperature is normal, if exceed the prescribed range, you need to immediately stop identify the cause of the failure, and to eliminate them. Need to pay special attention to the degree of wear parts in equipment,should pay attention to replace the worn parts at any time. Look at the anchor bolt fastening parts, whether in fastening state, if appear loose, need to give timely tightening, to protect the pebbles and sand making machine at work, can work quickly, ensure human safety.Foundation consolidation is very important. When in the selection of equipment foundation,need to choose the relatively high hardness of concrete as the foundation, from the relatively soft foundation.

Sand making machine at work, we need to use the ear to listen, listen to the equipment during operation, whether there are other noise or abnormal problems. If so, then, we need to stop, the need to identify the cause of the malfunction, and eliminate. Bear all the load bearing is the main equipment in the pebbles and sand making machine, so we do a good job, add lubricating oil on the good, the service life of the bearing has a direct relationship, it will directly affect the sand making machine, the service life of the equipment and operation efficiency. Therefore, the lubricating oil must be injected to ensure clean, sealing is good.