Linux kernel newbies em português

The company developed the production of sand making machine can be used for basalt sand production, but in this process, there are two kinds of working principle, namely "strike" and "against the iron material, crushing principle different basalt get finished pellet shaped, slightly different, in this paper, aiming at the two types of work the principle of the equipment for your brief introduction.
Basalt is extrusive rock relatively large one because of its hardness, wear resistance, eat less water, electrical conductivity, compressive resistance, crush value low, strong corrosion resistance, adhesiveness of asphalt is higher, so it in some industries in the construction of high quality materials to be used as a general, these industries were airport runway construction, highway construction, railway and other industries.
In the field of building construction, sometimes even using the same material of sand to build, but in different stages of construction, people on the sand particle shape is different, this is like Xuan Wuyan at different stages of road construction, the grain shape requirements are also different.
The main use of the basalt sand production equipment is the sand making machine, but in the same sand products, using the principle of different words, the basalt aggregate grain shape is different, and these two works were "hit" and "material against the iron", the following in the light of this two kinds of theory to explain for you.
Sand making machine in the "fight" principle refers to the basalt materials hit basalt materials, different materials to achieve the mutual collision and friction material crushing, plastic purpose. In this work, the other parts are not installed crusher sand making machine, but by the material directly inside the impact, after the impact of materials will be lining material formed in the crushing cavity edge, and this kind of lining material and then thrown out of the materials of mutual impact, thus breaking and shaping, finally get the grain shape comparison of rounded materials.
Sand making machine in the "material against the iron working principle is to install a liner in the crushing chamber, the liner to form part of the lining material to plug, the impact over the material can't stay here and the formation of lining material, only to hit the lining board, was broken after straight down, get the finished material, get the working principle of particle shape some needle flake.