Linux kernel newbies em português

The followings are the methods of installing the mixing blades of concrete mixer:Henan Daswell Machinery is a professional manufacturer of mining machine for almost 30 years in China. We are dedicated to supplying our customers with best service and products, our major products include:hollow block machine,concrete mixer for sale,egg laying type block machines,If you are interested in our products, please contact us freely: sales@daswell.com 1. The inclination angle of the mixing blades of concrete mixer must show no difference. 2. Because both the too big and too small inclination angles will affect the output of concrete mixer Stationary concrete batching plants, the inclination angle between the mixing blades and the mixing shaft should be about 70 degree or 80 degree. 3. When the mixing blades rotate to the top point and the mud emerges 20mm to 30mm mobile brick making machine concrete block making machine, it shows that the mixing blades are in the best inclination angle. 4. The angle of the mixing blades on both mixing shafts is 90 degree. 5. The mixing blades must be installed tightly and the first bolt on the mixing blades must be fastened as tight as possible. JZR Diesel Concrete Mixer The maintenance methods of the mixing blades of concrete mixer: 1. The abrasion of mixing blades. Cut down the abrasive edge of mixing blades with cutting torch. And then use the steel plate with the same thickness to weld on the mixing blades. 2. The handle of mixing blades is curved or broken. (1). The mixing blades are inadequate in strength. Increase the diameter of the handle of mixing blades and process it with round steel. (2). The material of the handle of mixing blades is too brittle. Use round steel to replace it.